Anti-glare board instructions

                    Anti-glare board instructions


Anti-glare board made of high-strength PC material, strength, anti-aging, strong anti-bending, 5 years is not obvious fade.

1. Product specifications: 900 * 230 * 4.5mm

2. Material: PC material, do not fade, no deformation, anti-aging, will not be blown off the wind, stronger wind resistance.

3. Color: green (adjustable). (No obvious fade in 5 years)

4. Temperature range: -40 ℃ ~ 65 ℃

5. Installation location: the middle of the road

6, installed in the wave guard rails or cement fence

7, there is certification







Shenzhen LuMing Traffic Equipment Co., Ltd.

TEL:     0086 755 27708545

MOB:     0086  13925263646

FAX:     0086 755 27701581

EMAIL: szlm@szlmjt.com 

ADD: 3F, Building 1, Futing Industrial Zone, Guanlan Street, Longhua New District, Shenzhen

POST CODE: 518110

WEBSITES：https://szlm9.1688.com/
             

评论

发表评论

此博客中的热门博文

Solar Synchronous Contour Specificatio

图片
Solar Synchronous Contour Specificatio On the highway night vision is poor, the road profile is not clear enough. Driving speed is too fast, in order to avoid or reduce the occurrence of traffic accidents. Our company has developed many years of experience to develop synchrotron LED lamp outline standard, which is characterized by: luminous intensity, visual distance, through the GPS technology to achieve solar contours at night synchronized flashing light, no distance limit, as long as the GPS satellite can receive The signal can be synchronized, better outline the outline of the road, the simple installation of the construction.         Technical indicators: 1, a variety of energy storage components: 3.6V nickel-metal hydride batteries 800mA, 3.7V lithium particles 800mA, lithium iron phosphate battery 3.2V-800MAH, charge and discharge times> 1000; 2, solar rechargeable batteries: monocrystalline silicon 5V 70MA 3, working time: in the standard li...
阅读全文

Aluminum alloy nail with solar spike installation instructions

图片
Aluminum alloy nail with solar spike installation instructions first, [Specifications]: 122 * 132 * 70MM, reflective film yellow, white, red, green, blue species. Second, [installation location]: installed in the edge of the road, at night flashing light on the driver from the warning effect, to remind carefully driving. Three, [material tools to prepare]: A glue (color transparent), B glue (color brown), cement, steel brush, scraper, chalk, tape, and plastic bucket, and glue stick, broom, the temperature is less than 10 degrees Prepare kerosene furnace and other heating tools. Drill and 28% drill, with a stick or an electric drill. Fourth, [installation process]: 1, positioning: spike installation to smooth, dry and dry, clean, seamless. 2, mixed with plastic: spike special A glue, spike special B plastic, A plastic B glue ratio is 1: 1 (such as: A glue 1 kg, B glue is 1 kg), and then add 20% of the cement Fillers. Glue must be stirred evenly, consistent color. ...
阅读全文

Enhanced full plastic spike brochures

图片
                 Enhanced full plastic spike brochures LLM plastic pail shell with reinforced plastic mold with a one-time molding, the material for the environment-friendly raw materials. The reflector is a vacuum coating, and the solid is bonded to the housing. Easy installation and long service life 1. Product Specifications: 100 * 100 * 20 2. Shell material: environmentally friendly reinforced materials 3. Temperature range: -30 ℃ ~ 75 ℃ 4. Installation location: road edge. 5, compression index: 16 tons of vehicle pressure. 6, waterproof rating: IP ≥ 67 7, the normal life: 3 years or more 8, quality assurance; in normal use for one year. Second, [installation location]: installed on the edge of the road, the driver from the warning effect, to remind carefully driving. Three, [material tools to prepare]: A glue (color transparent), B glue (color brown), white cement, scraper, chalk, tape, and p...
阅读全文