Controller instructions

Controller instructions

                                 

Performance parameters:

1 Power supply: 110V-220V

2 Input current: up to 568mA

3 Frequency: 50-60 Hz

4 Output voltage: DC24V

5 Output voltage range: ± 5%

6 Maximum power consumption: 0.6W

7 Display mode: straight or flashing

8 Control quantity: 80-100PCS (LED single or double-sided induced spike and induced contours)

9 Control group: three groups

10 working hours: 24h

11 Operating temperature: -30 ° C to + 70 ° C

12 Humidity: 5% -95%

13 LED indicator: green

Installation instructions: The following standards are used to disconnect the power supply

1, CCC-GB8898-2001; GB13873-2003;

2, GB17625.1-2003;

3, CE-EN60950-1: 2006 / A11: 2009.

4, in the operation must first clear the input and output, input voltage between 110-220V, the output is 24V. Input and output voltage can not be reversed, positive and negative can not be reversed.

3, LED induced contours positive and negative are not reversed, brown is positive, blue is negative. All connected in parallel. The terminal voltage should not be less than 10V.

Shenzhen LuMing Traffic Equipment Co., Ltd.

TEL:     0086 755 27708545

MOB:     0086  13925263646

FAX:     0086 755 27701581

EMAIL: szlm@szlmjt.com 

ADD: 3F, Building 1, Futing Industrial Zone, Guanlan Street, Longhua New District, Shenzhen

POST CODE: 518110

WEBSITES：

https://szlm9.1688.com/(China)

https://szlmjt.en.alibaba.com(English)