Engineering plastic spike installation instructions

Engineering plastic spike installation instructions

First, [Specifications]: 100 * 100 * 20MM, reflective film yellow and white two.

Second, [installation location]: the edge of the road, the middle of the road, the central road to do slow down spike

Three, [material tools to prepare]: A glue (color transparent), B glue (color brown), cement, steel brush, scraper, chalk, tape, and plastic bucket, and glue stick, broom, the temperature is less than 10 degrees Prepare the agitator and water to heat the A glue.

Fourth, [installation process]:
1, positioning: spike installation to smooth, dry and dry, clean, seamless.

2, mixed with plastic: spike special A glue, spike special B plastic, A plastic B glue ratio is 1: 1 (such as: A glue 1 kg, B glue is 1 kg), and then add 20% of the cement Fillers. Glue must be stirred evenly, consistent color.

3, with glue: the ground clean, with plastic to be moderate, both sticky road signs bottom, spikes around to benefit, but do not benefit too much, out of the glue can be used knife knife blowing, repeatable, sticky So after the two turn around, so that glue can be more even paste the ground and the road nail body.

4, tour: two hours after the installation of the spike should be checked again, the occurrence of crooked, should be reversed.

5, road closures: must be sealed road 6 hours to ensure that the glue curing time.

Established in 2006, “Shenzhen Lu ming Traffic Equipment Co., Ltd” was definited as an export-oriented high technology enterprise that specialize in solar traffic safety facilities’ R&D and sale over 10 years.

Our main products include: solar road studs, solar LED delineators, road reflectors, solar traffic safety signs, LED tunnel signs, traffic warning lights, solar traffic lights, anti-glare boards, solar LED anti-bump barriers, parking lot safety facilities etc.

Shenzhen LuMing Traffic Equipment Co., Ltd.

TEL:     0086 755 27708545

MOB:     0086  13925263646

FAX:     0086 755 27701581


ADD: 3F, Building 1, Futing Industrial Zone, Guanlan Street, Longhua New District, Shenzhen

POST CODE: 518110




Advance-warning triangle technical specifications teaching

Solar LED delineator post road delineators/solar road warning post