shenzhen luming traffic equiment co.，LTD

Solar Synchronous Contour Specificatio On the highway night vision is poor, the road profile is not clear enough. Driving speed is too fast, in order to avoid or reduce the occurrence of traffic accidents. Our company has developed many years of experience to develop synchrotron LED lamp outline standard, which is characterized by: luminous intensity, visual distance, through the GPS technology to achieve solar contours at night synchronized flashing light, no distance limit, as long as the GPS satellite can receive The signal can be synchronized, better outline the outline of the road, the simple installation of the construction.         Technical indicators: 1, a variety of energy storage components: 3.6V nickel-metal hydride batteries 800mA, 3.7V lithium particles 800mA, lithium iron phosphate battery 3.2V-800MAH, charge and discharge times> 1000; 2, solar rechargeable batteries: monocrystalline silicon 5V 70MA 3, working time: in the standard li...

Engineering plastic spike installation instructions First , [Specifications]: 100 * 100 * 20MM, reflective film yellow and white two. Second, [installation location]: the edge of the road, the middle of the road, the central road to do slow down spike Three, [material tools to prepare]: A glue (color transparent), B glue (color brown), cement, steel brush, scraper, chalk, tape, and plastic bucket, and glue stick, broom, the temperature is less than 10 degrees Prepare the agitator and water to heat the A glue. Fourth, [installation process]: 1, positioning: spike installation to smooth, dry and dry, clean, seamless. 2, mixed with plastic: spike special A glue, spike special B plastic, A plastic B glue ratio is 1: 1 (such as: A glue 1 kg, B glue is 1 kg), and then add 20% of the cement Fillers. Glue must be stirred evenly, consistent color. 3, with glue: the ground clean, with plastic to be moderate, both sticky road signs bottom, spikes around to benefit, but do n...

Aluminum alloy nail with solar spike installation instructions first, [Specifications]: 122 * 132 * 70MM, reflective film yellow, white, red, green, blue species. Second, [installation location]: installed in the edge of the road, at night flashing light on the driver from the warning effect, to remind carefully driving. Three, [material tools to prepare]: A glue (color transparent), B glue (color brown), cement, steel brush, scraper, chalk, tape, and plastic bucket, and glue stick, broom, the temperature is less than 10 degrees Prepare kerosene furnace and other heating tools. Drill and 28% drill, with a stick or an electric drill. Fourth, [installation process]: 1, positioning: spike installation to smooth, dry and dry, clean, seamless. 2, mixed with plastic: spike special A glue, spike special B plastic, A plastic B glue ratio is 1: 1 (such as: A glue 1 kg, B glue is 1 kg), and then add 20% of the cement Fillers. Glue must be stirred evenly, consistent color. ...

High crystalline silicon tempered glass solar spike Installation instructions Established in 2006, “Shenzhen Lu ming Traffic Equipment Co., Ltd” was definited as an export-oriented high technology enterprise that specialize in solar traffic safety facilities’ R&D and sale over 10 years. Our main products include: solar road studs, solar LED delineators, road reflectors, solar traffic safety signs, LED tunnel signs, traffic warning lights, solar traffic lights, anti-glare boards, solar LED anti-bump barriers, parking lot safety facilities etc. One, [size]: 100 * 100 * 50MM, light color yellow, white, red, green, blue species, surrounded by light. Second, [installation location]: installed in the edge of the road, flashing at night to better enhance the road landscape, outline the outline of the road, the driver from the warning effect, to remind carefully driving. Three, [material tools to prepare]: A glue (color transparent), B glue (color brown), white cement...

In recent years, with the development of our national highway, road safety facilities are also more and more perfect. Many of the safety products on the road were stolen, especially on the road signs because it is made with aluminum, with a high recyclable value, so the theft is also very serious, so to give the road safety is very Big security risks. Our company needs to develop anti-theft glass fiber reinforced plastic plate to replace the aluminum alloy sheet, so that lost the value of back to the back, which play a security role. And the strength of this material, the hardness of all aspects of performance have reached the requirements of aluminum plate. Our main products include: solar road studs, solar LED delineators, road reflectors, solar traffic safety signs, LED tunnel signs, traffic warning lights, solar traffic lights, anti-glare boards, solar LED anti-bump barriers, parking lot safety facilities etc.  Shen...

                                  shenzhen luming  traffic equiment co.，LTD Established in 2006, “Shenzhen Luming Traffic Equipment Co., Ltd” was definited as an export-oriented high technology enterprise that specialize in solar traffic safety facilities’ R&D and sale over 10 years. Our main products include: solar road studs, solar LED delineators, road reflectors, solar traffic safety signs, LED tunnel signs, traffic warning lights, solar traffic lights, anti-glare boards, solar LED anti-bump barriers, parking lot safety facilities etc. Our products are widely used in highways, bridges and urban roads, toll station and parking lots, Our company flagship trademarks "LM", "LLM" have been gaining good public praise over years As an ISO 9001 approvalled enterprise, Our workshop covers an area of 3,000 square meters. All of our products have CE certificates and other certif...